Advertisement
2.7. Learning Codes in Remote Controller
There are two options for pairing the device with remote controller, as described below. Re-
garding operations about further learning codes, please refer to the datasheet of the remote
controller used.
Tips: Inside the remote controller used, users will see each side of the battery compartment
has a channel setting button (see Figure 10), which is used for pairing the remote controller
and the corresponding motor, then receiving and processing further learning codes. The il-
lustration provided as below is for reference purposes only, and the actual remote control-
ler may differ.
Function
Step 1: Long press programming button
for 3s, then release until the indicator is
red. At this moment, the device is enter-
Option 1:
ing the status of learning code.
Pairing by
programming
button
Step 2: Press the channel setting button
on the remote controller (see Figure 10).
Step 1: Switch the device power off then
on. At this moment, the device is enter-
Option 2:
ing the status of learning code.
Pairing by
switching
power-on
Step 2: Press the channel setting button
on the remote controller (see Figure 10).
Operation
Status of
Status of
Indicator
Motor
Red light is
/
on.
After suc-
cessfully
Red light
set, the
flashes
motor ro-
then off.
tates
once.
Red light is
/
on.
After suc-
cessfully
Red light
set, the
flashes
motor ro-
then off.
tates
once.
Remark
11
Advertisement
