Advertisement
2.4. Erase Trave Limit
Tips: Travel limit can be erased by commissioning software or programming button. In this
section, it only gives information about the latter.
Operation
Long press programming button for
5s, then immediately release until
the indicator is flashing red.
2.5. Restore Factory Setting
Tips: Factory setting can be restored by commissioning software or programming button. In
this section, it only gives information about the latter.
Operation
Long press programming button for 10s,
then release until the indicator is off.
2.6. Update Firmware
Function
On-line update
Manually update
Red light is on then
Operation
Upgrade device firmware through com-
missioning software.
Press programming button, and simulta-
neously connect the device to power
supply. At this moment, [Manually Up-
date] can be enabled.
Next, proceed firmware updating
through commissioning software.
Status of Indicator
flashing.
Status of Indicator
Red light is on then
flashing, lastly off.
Status of Motor
After successfully
set, the motor ro-
tates once.
Status of Motor
After successfully
set, the motor
rotates once.
Status of
Status of
Indicator
Motor
Red light
/
flashes.
Red light
/
flashes.
Remark
Remark
Remark
10
Advertisement
