Advertisement
Table of Contents
USER MANUAL
dISpLAy
STANdARd
B
A
J
I
H
ChRoNo AUToMATIC
A
H
I
C2
RETRoGRAdE
G
A1
I
H
A:
Minutes counter (60 minutes)
A1:
5 minutes counter (60 minutes)
A2:
Minutes counter (30 minutes)
B:
Seconds counter
C:
1/10 second counter
C1:
1/2 minutes counter
C2:
6 minutes counter (6 hours)
d:
push-button
E:
Crown
F:
push-button
G:
hours hand
h:
Seconds hand
I:
Minutes hand
J:
Light Function
C = 1/10 sec.
D
E
F
G
B
D
E
F
G
C1 = 1/2 min.
D
E
F
B
TIME SETTING
SET
GO
SET
A:
Normal position of the crown
C:
position for setting the time
To set the time, pull the crown out to
posi-tion C and turn clockwise or anti-
clockwise. After resetting has been
completed, press the crown back to
position A.
A B C
A B C
A B C
1/6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Swatch SVCC4000
Summary of Contents for Swatch SVCC4000
-
Page 1: User Manual
USER MANUAL dISpLAy STANdARd C = 1/10 sec. ChRoNo AUToMATIC RETRoGRAdE C1 = 1/2 min. Minutes counter (60 minutes) 5 minutes counter (60 minutes) Minutes counter (30 minutes) Seconds counter 1/10 second counter 1/2 minutes counter 6 minutes counter (6 hours) push-button Crown push-button... -
Page 2: Date Setting
USER MANUAL dATE SETTING A B C A B C To set the date, pull the crown out to posi- tion and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A. SpLIT TIME STANdARd RETRoGRAdE STOP... -
Page 3: Timing Mode
USER MANUAL TIMING ModE STANDARD RETROGRADE START STOP RESET press… 1. The upper push-button to start the chronograph. 2. once again to read the elapsed time. 3. The lower push-button to reset. Retrograde: The duration of timing is limi- ted to 2 hours. Add FUNCTIoN CHRONO AUTOMATIC... - Page 4 USER MANUAL TAChyMETER STANdARd RETRoGRAdE START STOP RESET Measure the speed Base 100 or 1000 m. press... 1. The upper push-button when an action starts. 2. once again to stop after a distance of 100 or 1000 m. Read the speed indica- ted by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).
- Page 5 USER MANUAL RETRoGRAdE A B C A B C A B C Adjusting the chronograph (e. g.: after battery change or a hard shock) 1. pull the crown to position B. 2. press the lower button to reach the position 0 with the hand of the minutes counter.
- Page 6 C. 8. Simultaneously again, to com plete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If are not pressed within 5 seconds, the watch will carry out the acknowledge- ment function automatically.
Need help?
Do you have a question about the SVCC4000 and is the answer not in the manual?
Questions and answers