ETC Installation Guide
PCP Mk2 Replacement Kit
Save Configuration
Save Configuration with ETC Concert
ETC Concert v4.4.0 or later can save and export configuration files from the PCP-Mk2 v4.1.0 and
later as part of a project. For more information about configuration and file operations in Concert,
select Help from the menu of the Concert application. Concert is available for free download at
etcconnect.com.
Save Configuration to a USB Device
Saving a panel configuration from the UI creates a file for storage to the root directory of a
connected USB storage device.
1. Insert a USB storage device in the USB port on the left side of the front of the user interface.
2. Navigate to File Operations.
3. Press [Enter] (ü) to select Save Configuration.
4. The Save Configuration screen displays and the default "Filename: PCP_1" is selected. You
can save your file under a name between PCP_1 and PCP_16.
5. To select a different filename, press [Enter] (ü). The selection will focus on "PCP_#".
6. Use [Up] ( ) and [Down] ( ) to scroll through the list. Press [Enter] (ü) to make the selection.
7. Scroll to Save to USB key and press [Enter] (ü). The dialog will display "Saving to USB". The
file will always be saved to the root directory of the USB device.
Reboot the Processor
Reboot the PCP-Mk2.
Compliance
For complete product documentation, including compliance documentation, visit
etcconnect.com/products.
PCP Mk2 Replacement Kit
Page 5 of 5
ETC