Press the orange release button and push the armrest tube downward to your
desired height. There should be an audible "click" to signal that the orange
release button is fully engaged.Repeat the steps for the other arm rest. The
armrests should be set at a height that is high enough that you feel support
under your forearms when standing upright, but not so high as it may cause
your shoulders to "hunch."
Set the armrests at the same height and put equal weight on each forearm
while using.
1. Take out the cane holder ( if available) from the personal bag.
2. Snap the cane holder ( if available) all the way until it's secured.
C
Prior to eac use please ensure t e ollowing:
1.
ot adjustment uttons are engaged wit
t e andles in a locked position.
2. ot
andles are set at t e same adjustment.
arning: ailure to ollow sa ety instruction
may cause serious injury or deat .
23
Need help?
Do you have a question about the 712-047 and is the answer not in the manual?
Questions and answers
An O ring with ball bearings in the wheel assembly has come apart. What are the specifications for the O ring so that I can order another one