Unable To Cut Properly; The Film Peels Off During Cutting; Are The Tools Set Correctly - Silhouette portait4 User Manual

4-3 Unable to cut properly

If the media, such as paper or film, peel off during cutting, or if you are unable to cut them properly, check the
following causes and solutions.

The film peels off during cutting

Are the tools set correctly?

• Make sure that the tools are firmly set all the way into the Tool Holder.
Insert the tool all the way and then lock it.
If it is not inserted all the way, the media may not be cut properly.
Unlock
Rib
Tool
(Auto Blade)
When inserting the Auto Blade, hold the lock lever so that it is supported from the bottom,
and insert the Auto Blade until the very bottom.
Note that inserting the tool without holding the Tool Holder may damage the blade.
Lock
Additional information
Lock Lever
Align with the notch
Tool Holder
Note
Lock Lever
Tool
(Auto Blade)
Tool Holder
Set it all the way so that there is no gap
between the media and the top of the Tool
Holder.
04 Troubleshooting
55