Pattern 3. Loading And Tracing An Image File - Silhouette portait4 User Manual

The auto-trace function may not be available depending on the way the image is created.
In such a case, trace the image using the steps described in "Pattern 3. Loading and tracing an image file".

Pattern 3. Loading and tracing an image file

Create cutting lines using the image that you want to cut. Use the trace function to create cutting lines around
the image.
Operation method
1
On the "File" menu, select "Insert".
2
Select the image you want to cut and press "OK".
3 From "Panel Display", select the "Trace" panel to display the "Trace" settings screen.
Click "Select Trace Area". Drag and select the area around the image.
The inside of the image is painted yellow. The part painted yellow is traced, and cutting lines are created
around it.
4
Under "Trace Preview", select "Solid Fill" or "Outline".
Adjust the threshold value.
To create cutting lines around the whole image, select "Trace".
To create cutting lines only on the outer edge, select "Trace Outer Edge".
Additional information
02 Easy Operation Guide
41