Scsi Controller Enabled/Disabled; Scsi Termination Enabled/Dsiabled - Supermicro X7DB8 Plus User Manual

X7DB8+/X7DBE+ User's Manual
SCSI Controller Enable/
Disable
Jumper JPA1 is used to enable or dis-
able the LSI SCSI controller. The de-
fault setting is on pins 1-2 to enable
SCSI. See the table on the right for
jumper settings.
SCSI Termination Enable/
Disable
Jumpers JPA2/JPA3 are used to en-
able or disable termination for SCSI
Channel A (JPA2) and Channel B
(JPA3) connectors. The default setting
is open to enable termination. See the
table on the right for jumper settings.
*Note: In order for the SCSI drives to
function properly, please do not change
the default setting (open: enabled) set
by the manufacturer.
GLAN1
GLAN2
SIMLP IPMI
SEPC
PCI-Exp x8
PCI-Exp x4
Both Jumpers
Pins 1-2
Pins 2-3
SCSI Term. Enable/Disable
Jumper Setting
Open
Closed
8-pin PWR
FP Ctrl
3rd PWR
PWR
Detect
Fault
PWRSMB
JAR
Fan8
C
B
SCSI CTRL
A
320 SCSI Channel B
2-26
SCSI Enable/Disable
Jumper Settings (JPA1)
Defi nition
Enabled
Disabled
Jumper Settings
Defi nition
Enabled
Disabled
A. SCSI Enable
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel B Termi-
nation Enable