Table of Contents
Advertisement
X7DB8+/X7DBE+ User's Manual
IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, SATA
Port2 and SATA Port3
These settings allow the user to set the parameters of IDE Channel 0 Master/Slave,
IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master slots.
Hit <Enter> to activate the following sub-menu screen for detailed options of these
items. Set the correct confi gurations accordingly.
Type
This option allows the user to selects the type of IDE hard drive. The option
Auto will allow the BIOS to automatically confi gure the parameters of the
HDD installed at the connection. Enter a number between 1 to 39 to select a
predetermined HDD type. Select User to allow the user to enter the parameters
of the HDD installed. Select CDROM if a CDROM drive is installed. Select ATAPI
if a removable disk drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be
used in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors,
and 16 Sectors.
4-4
Advertisement
Table of Contents
