Quick Reference - Supermicro X7DB8 Plus User Manual

Quick Reference ( X7DB8+/X7DBE+)
Jumper Description
2
J27, J28 I C Bus to PCI-X/PCI-E Slots
J3P 3rd PWR Failure Detect
JBT1 CMOS Clear
JCF1 Compact Card Master/Slave Select
JPA1 (*X7DB8+) SCSI Controller Enable
JPA2, JPA3 SCSI CHA(JPA2),CHB(JPA3)Term.En Off (Enabled) (*X7DB8+)
JPG1 VGA Enable
JPL1/ JPL2 GLAN1/GLAN2 Enable
JWD Watch Dog
Connector
ATX PWR (JPW1)
Aux. PWR/CPU PWR
Alarm Reset (JAR)
Compact Flash PW(JWF1) Compact Card PWR Connector (*Used if JFC1 is on.)
COM1/COM2
Chassis Intru. (JL1)
DA1/DA2
DIMM#1A-DIMM#4D
FAN 1-8
FP CTRL (JF1)
Floppy (J22)
GLAN 1/2 (JLAN1/2)
IDE1/IDE2 (*Note)
Keylock (JK1)
OH LED (JOH1)
Parallel Port (J21)
PWR LED/Speaker (JD1) PWR LED(pins1-3)/Speaker Header (pins 4-7)
PWR LED (LE1)
PWR SMB (J17)
PSF (JP3)
SATA0-SATA5
SCSI Chan.A/B(JA1/JA2) SCSI Channel A & B Connectors (*X7DB8+ only)
SGPIO 1/2
SIMLP IPMI (Slot 7)
SMB (J18)
USB 0/1,USB 2/3, USB4 Back Panel USB 0/1, Front Panel USB 2/3, FP USB4
VGA (J15)
WOL (JWOL)
WOR (JWOR)
*Note: JIDE2 is for Compact Card Use only. For Compact Card to work properly,
please enable JCF1 by putting a jumper on it and connect JWF1 to a power
supply.
Description
Primary 24-Pin ATX PWR Connector
+12V 4-pin PWR (JWP2)/+12V 8-pin PWR(JPW3)
Alarm Buzzer Reset
COM1/COM2 Serial Port Connectors
Chassis Intrusion Header
SCSI Activity LED Indicators (See Chapter 2)
Memory DDRII Slots (*See Section 2-3 in Chapter 2)
Fans 1-8 (3-pin: Fans1-4, 4-pin: Fans5-8, Fans7/8:
CPU Fans)
Front Control Panel Connector
Floppy Disk Drive Connector
G-bit Ethernet Ports
IDE1 Hard Drive (JIDE1)/Compact Flash Card (JIDE2)
Keylock Header
Overheat LED
Parallel (Printer) Port
PWR LED Indicator (*Note6 on Pg.1-4)
Power System Management (I
Power Fault (Power Supply Failure: See Chapter 2)
Intel SATA 0-5 Connectors
Serial General Purpose Input/Output Headers
SIM Low Profi le IPMI Connector
System Management Bus Header
VGA Connector
Wake-on-LAN Header
Wake-on-Ring Header
1-5
Chapter 1: Introduction
Default Setting
Open
(Disabled)
Off (Disabled)
(See Chapter 2)
On (Master)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
2
C) Header