Scsi Controller Enabled/Disabled; Scsi Termination Enabled/Dsiabled - Supermicro Supero X7DB8 User Manual

X7DB8/X7DBE User's Manual
SCSI Controller Enable/
Disable
Jumper JPA1 is used to enable or disable
the LSI SCSI controller. The default set-
ting is on pins 1-2 to enable SCSI. See
the table on the right for jumper settings.
SCSI Termination Enable/
Disable
Jumpers JPA2/JPA3 are used to enable
or disable termination for SCSI Channel
A (JPA2) and Channel B (JPA3) con-
nectors. The default setting is open to
enable termination. See the table on the
right for jumper settings.
*Note: In order for the SCSI drives to
function properly, please do not change
the default setting (enabled) set by the
manufacturer.
GLAN1
GLAN2
SIMLP IPMI
SEPC
PCI-Exp x8
PCI-Exp x4
Jumper Settings (JPG1)
Jumper Setting
Pins 1-2
Pins 2-3
SCSI Term. Enable/Disable
Jumper Setting
Open
Closed
8-pin PWR
SMB PS PSF
J3P
JAR
C
B
SCSI CTRL
A
320 SCSI Channel B
2-26
VGA Enable/Disable
Defi nition
Enabled
Disabled
Jumper Settings
Defi nition
Enabled
Disabled
A. SCSI Enable
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel B Termi-
nation Enable