Scsi Controller Enabled/Disabled; Scsi Termination Enabled/Dsiabled - Supermicro X7DB8-X User Manual

X7DB8-X/X7DBE-X User's Manual
SCSI Controller Enable/
Disable (*X7DB8-X Only)
Jumper JPA1 is used to enable or disable
the LSI SCSI controller. The default set-
ting is on pins 1-2 to enable SCSI. See
the table on the right for jumper settings.
SCSI Termination Enable/
Disable (*X7DB8-X Only)
Jumpers JPA2/JPA3 are used to enable
or disable termination for SCSI Channel
A (JPA2) and Channel B (JPA3) con-
nectors. The default setting is open to
enable termination. See the table on the
right for jumper settings.
*Note: In order for the SCSI drives to
function properly, please do not change
the default setting (enabled) set by the
manufacturer.
B uzzer
GLAN1
GLAN2
5000P
S IMLP IPMI
SCSI Enable/Disable
Jumper Settings (JPA1)
Jumper Setting
Pins 1-2
Pins 2-3
SCSI Term. Enable/Disable
Jumper Settings
Jumper Setting
Open
Closed
S MB PS 8-pin P W R
PSF
J 3P
J A R
A. SCSI Enable
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel B Termi-
nation Enable
C
E S B 2
B
S C S I C T R L
Adaptec 7902
A
320 S C S I C hannel B
2-26
Defi nition
Enabled
Disabled
Defi nition
Enabled
Disabled