Supermicro X6DVL-iG2 User Manual page 11

Quick Reference (X6DVL-INF/X6DVL-iG2)
Jumper Description
J13 SMB Data to PCI Enable
J15 SMB Clock to PCI Enable
JBT1 Clear CMOS
JF2 Speaker, PWR LED, Keylock
JPG1 Video Enable
JPIB1 (*Note2) InfiniBand Enable
JPEI EEPROM Presence
JPL1/JPL2 LAN1/LAN2 Enable
JWD Watch Dog Enable
*JPD1(Reserved) InfiniBand Performance Control
Connector
ATX PWR (PW1)
CPU PWR (PW2)
Buzzer (LS1)
COM1(J4)/COM2 (J5)
DS1-2, DS4-5
DS7, DS8
DS9
DIMM#1A-#4B
FAN #1-#6
Floppy (J24)
FP Ctlr (JF1)
I-SATA 0/1
IDE1, IDE2
IPMI (J20)
J22 (*Note2)
JB1/JB2 (*Note2)
JLAN1/JLAN2
JL1
Keyboard/Mouse (J2)
PCI#6
Port1 LED/Port2 LED
WOL(J23)
WOR (JWOR)
USB 0/1(J3)
USB 2/3 (J42)
V G A (J6)
*Notes: Note 1:SDR=Single Data Rate Mode (default), DDR=Double Data
Rate Mode. Note 2: All components related to the InfiniBand are available on
the X6DVL-INF only.)
Primary 24-pin ATX PWR Connector
12V 8-pin CPU PWR Connector
Buzzer
COM1/COM2 Serial Port Connectors
Onboard LED Indicators (*See Chapter 2)
POST Code LED (*See Appendix A)
System LED Indicators (*See Chapter 2)
Memory (DIMM) Slots#(1A,1B to 4A,4B)
CPU Fan Headers(Fans 1-2), Chassis Fans
Headers (Fans 3-6)
Floppy Disk Drive Connector
Front Panel Control (* See Chapter 2)
Intel 6300ESB -Serial ATA Ports 0/1
IDE #1/2 Hard Disk Drive Connectors
IPMI Socket
InifiniBand Local Memory (Unbuffered ECC DDR-
266, 333) slot
InifiniBand Headers 1/2
G-bit Ethernet (GLAN1/GLAN2) Ports
Chassis Intrusion Header
PS2 Keyboard/Mouse Ports
PCI 64-bit 66MHz slot
InfiniBand Port 1/Port 2 LED Indicators (*Note2)
Wake-on-LAN
Wake-on-Ring Header
Back Panel Universal Serial Bus Ports
Front Panel Universal Serial Bus Ports
Video Graphics Connector
1-5
Chapter 1: Introduction
Default Setting
Open (Disabled)
Open (Disabled)
See Chapter 2
Pins 5-7 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Open (Present)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Pins 1-2(SDR) (*Notes)
Description