Onboard Led Indicators; System Alert Led Indicators - Supermicro X6DVL-iG2 User Manual

Onboard LED Indicators

(DS 1-2, DS 4-5) and POST
LED (DS 7-8)
In addition to the LAN LED Indica-
tors and SATA LED Header, there
are other LED indicators (DS1-
DS2, DS4-DS5, DS7- DS8 ) on the
motherboard. See the table on the
right for speaker pin definitions.
(*Note: Please refer to Appendix A
for DS7 and DS8 LED POST
Codes.)
System Alert LED Indicator
(DS 9)
In addition to the LED indicators
listed above, there is a System
Alert LED indicator (DS9) on the
motherboard. See the table on the
right for speaker pin definitions.
24-Pin ATX PWR
8-pin
PWR
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
DIMM 3B
DIMM 3A
DIMM 4B
DIMM 4A
MT25208
InfiniBand
chip
Unbuffered ECC DDR-333(IB Local Memory)
DS4
P W 1
6300ESB
USB2/3
J F 2
JBT1
J 2 2 JL1
2-23
Chapter 2: Installation
On board LED Pin Definitions
DS#
DS1 CPU PW R good or CPU +12V PW R
Cable must be connected.
DS2 CPU2 VRM Overheat
DS4 CPU1 VRM Overheat
DS5
DS7-8
System Alert LED (DS9) Pin Definitions
DS9 Definition
Green System: On & OK
Yellow System: Off, PWR Cable Connected
Red PWR or CPU Failure, Overheat
DS2
DS2
DS8
DS7
DS5
DS1
DS1
DS9
DS9
J W D
Buzzer
Definition
PW R LED
POST LED