Eeprom Presence - Supermicro X6DVL-iG2 User Manual

SMB Data to PCI and SMB
clock to PCI Enable/Disable
Jumper J13 allows you to enable
SMB Data to PCI slots, and Jumper
J15 allows you to enable the SMB
Clock to PCI Bus. See the tables on
the right for pin definitions.

EEPROM Presence

Jumper JPE1 determines if there is
an EEPROM
motherboard. Close Jumper JPE1 if
an EEPROM is not present. See the
tables on the right for pin defini-
tions.
SMB Data to PCI
SMB Clock to PCI
EEPROM Presence
present on the
24-Pin ATX PWR
8-pin
PWR
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
DIMM 3B
DIMM 3A
DIMM 4B
DIMM 4A
MT25208
InfiniBand
chip
Unbuffered ECC DDR-333(IB Local Memory)
2-21
Chapter 2: Installation
SMB Data to PCI Bus
(J13)
Jumper
Position Definition
Off Disabled
On Enabled
SMB Clock to PCI Bus
(J15)
Jumper
Position Definition
Off Disabled
On Enabled
EEPROM Presence
Jumper
Position Definition
Closed Not Present
Open Present
P W 1
6300ESB
USB2/3
J F 2
DS1
JBT1
Buzzer
JL1
DS2
DS9
J W D