Moving The Device; Operator Panel And Display - IKA RC 2 GREEN basic Operating Instructions Manual

Moving the device:

Empty all fluid in the bath before moving device from one
place to other place�
The device must be lifted by two persons with the upper
handles�
It can also be moved on flat surface by lifting and pushing
the front of the device� It is easy to move the device with
the help of the wheels�
The angle of inclination should never be more than 10 º at
any direction when move the device!
Note: The device must not be moved during operation�
After moving the device, you must wait at least one hour
before restarting the unit�
N
Fig. 10
Item Designation
A On/Off button:
B LED, set:
C LED, cooling:
D LED display:
E "Menu" button:
F LED, lock:
G Lock button:
H "OK / Pump" button:
I "Pump (+)" button:
J "Pump (-)" button:
K "Temp" button:
L "Temp (+)" button:
M "Temp (-)" button:
N Fluid level indicator:

Operator panel and display

A B C
M L K
Function
Switch on/off the circulator�
The LED lights up at the same time as the set value is displayed�
The LED indicates the refrigerating function is activated�
Display the settings and actual values�
Press it once: menu option is display�
Press it once again: back to working screen�
Indicate the buttons are deactivated�
Lock/unlock buttons�
Start/stop the pump function�
Confirm the menu options�
Increase the pump speed setting�
Change the menu value setting�
Decrease the pump speed setting�
Change the menu value setting�
Start/stop the tempering function�
Increase the temperature setting�
Navigation, selecting the settings in the menu�
Decrease the temperature setting�
Navigation, selecting the settings in the menu�
Indicate the fluid level (when the fluid level is too low or too high, the bottom or the
top LED segment change into red color)�
Fig. 9
D E F G
GREEN
J I H
max. 10 ˚
11