Dmi Event Logging; Remote Access Configuration - Supermicro X5DPA-TGM User Manual

Chapter 4: AMIBIOS
!Processor & Clock Options
HyperThreading
Select "Enabled" to enabled the function of HyperThreading for HT
supported processor(s). The Options are "Enabled" or "Disabled."
Ratio CMOS Setting
This feature allows the user to set the ratio between CPU Core Clock and
the FSB Frequency. Enter the desired setting by typing a number
between 12 and 23 or use the +, - and arrow keys to select the desired
setting.
Spread Spectrum
Select "Enabled" to activate the function of "Spread Spectrum" in order to
reduce the possibility of Electromagnetic Interference. The options are
"Enabled" and "Disabled."

!DMI Event Logging

View Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Logs
This setting will clear all event logs when set to "OK". Options are "OK"
and "Cancel".
Event Log Statistics
.
This setting allows you to view Event Log Statistics

!Remote Access Configuration

You can use this screen to select options for the Remote Access
Configuration. Use the up and down <Arrow> keys to select an item.
Use the <Plus> and <Minus> keys to change the value of the se-
lected option.
Remote Access
This feature allows the user to disable the function of Remote Access. If
"Disabled" is not select, then you can select a Remote Access type. The
options are "Disabled" or "Serial". If the option is set to Serial, the
following items will display:
4-15