Dmi Event Logging; Remote Access Configuration - Supermicro X5DPA-8GG User Manual

S
UPER X5DPA-8GG User's Manual
!Processor & Clock Options
Hyper Threading
Select "Enabled" to enabled the function of Hyper Threading for HT
supported processor(s). The Options are "Enabled" or "Disabled."
Ratio CMOS Setting
This feature allows the user to set the ratio between CPU Core Clock
and the FSB Frequency. The default setting is "8".
Spread Spectrum
Select "Enabled" to activate the function of "Spread Spectrum" in order to
reduce the possibility of Electromagnetic Interference. The options are
"Enabled" and "Disabled."

!DMI Event Logging

View Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Logs
This setting will clear all event logs when set to "OK". Options are "OK"
and "Cancel".
Event Log Statistics
This setting allows you to view Event Log Statistics.

!Remote Access Configuration

You can use this screen to select options for the Remote Access Configu-
ration. Use the up and down <Arrow> keys to select an item. Use the
<Plus> and <Minus> keys to change the value of the selected option.
Remote Access
This feature allows the user to disable the function of Remote Access. If
"Disabled" is not select, then you can select a Remote Access type. The
options are "Disabled" or "Serial".
Serial Port Number
Select the serial port you want to use for console redirection. You can set
the value for this option to either "COM1" or "COM2".
4-16