Table of Contents
Advertisement
MAINTENANCE
WARNING
Always stop the engine and unplug the spark plug before doing any repairs or maintenance. Never
touch the rotating blade.
Check and maintain fuel level regularly, and check engine oil daily.
At regular intervals, check the tightness of all nuts, bolts and screws.
If the blade hits an obstacle check for damage and if the machine vibrates badly stop the machine
and take it to a service dealer.
CAUTION
Always refuel in a well-ventilated area with the engine off.
Whilst carrying out maintenance you must wear appropriate Personal Protective Equipment (PPE).
Suggested PPE Sturdy footwear, work gloves and long trousers.
CAUTION
NEVER use a "pressure washer" to clean your stump grinder. Water can penetrate areas of the
unit and cause damage to spindles, pulleys, bearings, or the engine.The use of pressure washers
will result in shortened life and reduce serviceability. Shut down the engine, wait for all moving
parts to come to a complete stop, remove H.T lead, and then wait for 5 minutes before performing
maintenance on the machine.
20
Advertisement
Table of Contents
