Table of Contents
Advertisement
GENERAL FUEL SAFETY (where applicable)
CAUTION
ALL FUELS ARE FLAMMABLE
Fire hazard - keep fuel away from all sources of ignition for example heaters, lamps, sparks from
grinding or welding.
Pay attention when handling fuel. Petrol is flammable and the vapors are highly explosive.
Never remove the fuel cap or add fuel with the engine running. Stop the engine and allow to cool
before refueling. Never fuel machine indoors or in a confined space. DO NOT overfill with petrol –
always leave a 15mm gap at the top of the fuel tank.
DO NOT smoke while adding fuel or around machine while operating.
Fill your engine with SAE10w-30/15w-40 engine oil before use or serious damage will occur.
Never refuel or store the machine in a place where there is open flame, spark or other forms of open
flames or ignition.
DO NOT attempt to start the engine if fuel is spilled. Wipe away the spillage and ensure all fuel has
dried before starting the machine.
ALWAYS make sure the fuel cap is securely tightened and replaced before starting.
If the fuel tank needs to be drained, it should be done outdoors and into an approved container.
DO NOT carry out hot work on tanks that have contained fuel it is extremely dangerous.
ALWAYS keep work area clean and tidy.
ALWAYS clean up all spills promptly using correct methods i.e. absorbent granules and a lidded bin.
ALWAYS dispose of waste fuels correctly.
4
Advertisement
Table of Contents
