Maintenance - Hyundai HYSG150-2 User Manual

10. MAINTENANCE

Always stop the engine and unplug the spark plug before doing any repairs or maintenance.
Never touch the rotating blade.
Check and maintain fuel level regularly, and check engine oil daily.
At regular intervals, check the tightness of all nuts, bolts and screws.
If the blade hits an obstacle check for damage and if the machine vibrates badly stop the
machine and take it to a service dealer.
Always refuel in a well-ventilated area with the engine off.
Whilst carrying out maintenance you must wear appropriate Personal Protective
Equipment (PPE). Suggested PPE Sturdy footwear, work gloves and long trousers.
NEVER use a "pressure washer" to clean your stump grinder. Water can penetrate areas of
the unit and cause damage to spindles, pulleys, bearings, or the engine. The use of pressure
washers will result in shortened life and reduce serviceability. Shut down the engine, wait for
all moving parts to come to a complete stop, remove H.T lead, and then wait for 5 minutes
before performing maintenance on the machine.
WARNING
CAUTION
CAUTION
20