Table of Contents
Advertisement
AIR FILTER
Risk of burn from HOT engine and HOT oil – allow engine and engine oil to cool down before topping
up or replacing oil.
Drain the used oil while the engine is warm. Warm oil drains quickly.
Remove the filler cap/dipstick and the drain plug, then place a suitable container under the oil drain
plug and tilt the machine to catch the used oil.
Wait until all of the oil has drained from the engine. Once all oil is drained check the drain plug
washer and replace if damaged. Replace the drain plug by hand to prevent cross threading then
fully tighten.
DO NOT dispose of used motor oil in a manner that is incompatible with the environment. We
suggest you take used oil in a sealed container to your local recycling center or service station for
reclamation. Do not throw it in the domestic waste, pour it on the ground or down a drain.
With engine/machine on level ground fill to the upper edge of the oil filler neck with SAE15W40 oil.
DO NOT overfill.
Screw the filler cap / dipstick in securely.
Clean up any spilt oil.
24
Advertisement
Table of Contents
