Emergency Shutdown Procedure - Hyundai HYTC150-2 User Manual

Roll the machine forward and back, by pushing and pulling on the control handle. To do this, release
the park brake. Relock it when the machine has been repositioned and continue cutting.
CONTINUE WITH FINAL ROOT REMOVAL
Cut the remaining roots as described 1.166 until satisfactorily removed
SHUTTING OFF THE GRINDER
When stopping the machine after normal operation. Lower engine speed to slow, and push the
emergency switch.
Set park brake before leaving the controls
Shut off the engine by turning the ON/OFF switch to OFF.
SHUTDOWN PROCEDURE
In consideration of your own safety and that of others, you should always use the following normal
shutdown procedures before departing from the controls for any reason including cleaning, servicing,
transporting or inspecting the stump grinder. Never deviate from this procedure unless so instructed
in this manual or in an emergency that requires it. A rotating cutting wheel is very dangerous. Stand
at controls and ensure that the cutting wheel comes to a complete stop before doing anything else.
Move the engine throttle to the slow position.
Push the emergency (on/off) switch to stop the engine.
Set park brake before leaving controls.

EMERGENCY SHUTDOWN PROCEDURE

Immediately push the emergency (on/off) switch to stop the engine.
Be sure to allow all moving parts to come to a complete stop.
Pull the brake lever to engage the brake.
Rectify the emergency situation and return to normal operation.
19