Air Filter - Hyundai HYTC150-2 User Manual

Grease the main cutting blade shaft bearings every 20 hours of use. There is a grease nipple on
each bearing.
Check the tightening of all bolts and screws at regularly intervals.
If the grinder hits an obstacle violently, stop the grinder and take it to a specialist for inspection.

AIR FILTER

Never let the engine run without the air filter being fitted. A dirty air filter element affects the engine
performance, increase fuel consumption and makes it difficult to start. If you notice a loss of engine
power, check the air filter. You MUST make sure that the housing is free of dust and debris DO NOT
allow any dust or debris to enter the carburetor.
Remove the air filter cover by unscrewing the air filter cover wingnut in an anti-clockwise direction,
carefully remove the cover.
Once the air filter cover has been removed you can undo the air filter wingnut.
Undo the air filter wingnut and remove the Paper/Foam filter element. If it is damaged replace it.
Otherwise tap the filter to remove dust particles. Blow the remaining debris from the filter using a
low pressure airline. Blow from inside the filter outwards. Wash the foam part in detergent and allow
to dry. To reinstate the filter assembly reverse the above process.
22