Honda CB 500F 2012 Manual page 94

13 CB500F-32MGZA000.book 91 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
(CB500FA only)
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙
Front Wheel
Removal
1. Park on a firm, level surface.
2. Cover the right side of the front wheel
and brake caliper with protective tape or
cloth.
3. On the right side, remove the mounting
bolts and brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
u
the disc or pad surfaces.
u Do not pull the brake lever while the
brake caliper is removed.
Tyre Puncture
u
u Take care to prevent the brake caliper
from scratching the wheel during
removal.
Tape or cloth
Brake caliper
Wheel speed sensor
(CB500FA only)
Side collar
Removing Wheels
Mounting bolts
Pulser ring
(CB500FA only)
continued 91