Table of Contents
Advertisement
3
Close the drive release handle to lock the drive in place.
Figure 22. Installing the hot-swappable drive
Next step
1
Replace the front
bezel.
Removing the drive from the drive carrier
Prerequisites
1
Follow the safety guidelines listed in
2
If installed,
remove the front
3
Remove the
drive.
Steps
1
Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2
Lift the drive out of the drive carrier.
52
Installing and removing system components
Safety
instructions.
bezel.
Advertisement
Table of Contents
