Switching The Input Mode; Adjusting The Volume; Displaying The Black Screen And Turning Off The Sound Temporarily - Sharp XG-F315X Operation Manual

Image Projection (Continued)

Switching the Input Mode

Select the appropriate input mode for
the connected equipment.
Press COMPUTER, DVI, S-VIDEO or
VIDEO on the remote control to select
the input mode.
• When you press INPUT on the projector or DVI
on the remote control, the INPUT list appears.
Press P/R to switch the INPUT mode.

Adjusting the Volume

Press VOL +/– on the remote control or
–O/Q+ on the projector to adjust the vol-
ume.
Note
• Pressing VOL–/–O will lower the volume.
• Pressing VOL+/Q+ will raise the volume.
• When the projector is connected to external
equipment, the volume level of the external equip-
ment changes in accordance with the volume
level of the projector. Set the projector's volume
to the lowest level when turning the projector on/
off or when changing the input signal.
• When you do not want to output the sound from
the projector's speaker while the projector is con-
nected to external equipment, set "Speaker" in
"PRJ-ADJ" menu to "Off". (See page 46.)
Displaying the Black Screen
and Turning off the Sound
Temporarily
Press AV MUTE on the remote control
to temporarily display a black screen
and turn off the sound.
Note
• Pressing AV MUTE again will turn the pro-
jected image back on.
30
COMPUTER, DVI,
S-VIDEO, VIDEO
buttons
On-screen display
On-screen display
AV MUTE button
VOL +/– (Volume)
buttons