Setting Timer Programming; Starting The Programme; Interrupting Programme; Terminate Programme - Gaggenau DF250 User Manual

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.
Press ⁠ .
1.
Press or
2.
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h 25min) or "Finish at" (e.g.
15:20 hours). You can change this
setting in the "Basic settings"
→ Page 41.
To activate timer programming,
3.
press ⁠ .
Tip: To deactivate timer program-
ming, press
3 seconds.

Starting the programme

Press .
▶
The display shows the programme
a
information.
The programme has ended when
a
the display shows "Finished!".
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 39
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
repeatedly until the
for approx.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press ⁠ .
1.
The programme is saved and the
a
appliance switches off.
Press to resume the pro-
2.
gramme.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
3 seconds.
As soon as the displays are off,
a
the display shows "Programme
was terminated." and then "Fin-
ished!".
The programme is cancelled and
a
ends after approx. 1 minute.
Display programme informa-
tion
You can show information about pro-
grammes and additional functions on
the display.
Press ⁠ .
1.
Press the programme button or an
2.
additional function.

Switching off appliance

Please note the information on
1.
"Safe use" → Page 11.
Press .
2.
Basic operation en
for approx.
39