Setting Timer Programming; Starting The Programme; Interrupting Programme; Terminate Programme - Gaggenau DF250141 User Manual

Hide thumbs Also See for DF250141:
Table of Contents

Advertisement

en Basic operation

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.
Press
⁠ .
1.
"h:01" appears in the display.
a
Use
or
to set the required
2.
start time for the programme.
Press
⁠ .
3.
This activates timer programming.
a
Tip: To deactivate timer program-
ming, press
or
"h:00" appears in the display.

Starting the programme

Press
.
The programme has ended when
a
the display shows "0:00".
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 38
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
38
repeatedly until
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
⁠ .
1.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
2.
gramme.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
3 seconds.
Close the appliance door.
3.
The programme is cancelled and
a
ends after approx. 1 minute.

Switching off appliance

Please note the information on
1.
"Safe use" → Page 11.
Press
.
2.
To prevent damage from dripping
3.
water, turn the water tap off tight
(not applicable to appliances with
Aqua-Stop).
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
for approx.
during the wash

Advertisement

Table of Contents
loading

Table of Contents