Replacing A License Plate Light Bulb; Supporting The Motorcycle - Yamaha YZF660N 2022 Owner's Manual

Periodic maintenance and adjustment
Replacing a license plate light
bulb
1. Remove the license plate light unit
bolts.
1
1
2
7
1. Bolt
2. Collar
3. License plate light bulb socket
4. License plate light unit
2. Remove the license plate light
bulb socket (together with the
bulb) by turning it counterclock-
wise, and then pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
EAU49722
2
3
4
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in, and then
turning it clockwise until it stops.
6. Place the license plate light unit in
the original position, and then in-
stall the bolts.

Supporting the motorcycle

1
1. Maintenance stand (example)
Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
up right.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
7-34
EAU67131
1