Yamaha YZF660N 2022 Owner's Manual page 27

Average fuel consumption display
1
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG" when using miles. To switch the
fuel consumption measurement units,
hold the "SEL" switch until the mea-
surement units change.
 "AVE_ _._ km/L": the average dis-
tance that can be traveled on 1.0 L
of fuel.
 "AVE_ _._ L/100 km": the average
amount of fuel necessary to travel
100 km.
 "AVE_ _._ MPG": the average dis-
EAU89194
tance that can be traveled on
1.0 Imp.gal of fuel.
TIP
 To reset the display, change the
display to the average fuel con-
sumption display, and hold the
"RES" switch until it resets.
 After resetting, "- -.-" is shown un-
til the vehicle has traveled some
distance.
Coolant temperature display
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
Instrument and control functions
If the message "HI" flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 7-37.)
TIP
 When the coolant temperature is
 The coolant temperature varies
Air temperature display
EAU93210
1
1. Air temperature display
This display shows the air temperature
from –9 °C to 50 °C in 1 °C increments.
The temperature displayed may vary
from the actual ambient temperature.
4-9
below 40 °C, "Lo" will be dis-
played.
with changes in the weather and
engine load.
1
4
EAU93222