Introduction; Features - Monoprice Select Mini 3D Printer V2 User Manual

 Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
 Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.
 Unplug this device from the power source when not in use.
 Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
 Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.

INTRODUCTION

Thank you for purchasing this 3D printer from Monoprice! This printer features a single
extruder, which is capable of printing in PLA, ABS, wood, copper fill, steel fill, bronze fill,
and other materials. You can print from a Windows® or Mac® PC using a USB connection or
can print from 3D model files stored on a microSD
connection of any kind. This printer is easy to setup and easy to use following the
instructions in this manual.

FEATURES

 Single extrusion print head
 Can print PLA, ABS, wood, copper fill, steel fill, bronze fill, and other materials
 Open frame design for ease of use and maintenance
 Includes 256MB microSD
™
card with Cura, Repetier-Host, and a sample 3D model
™
4
card, without the need for a PC