The Copy Output Is Hardly Readable And Copied Poorly - Canon i-SENSYS MF3010 User Manual

The Copy Output is Hardly Readable and Copied Poorly

Is the
output tray
slot
blocked?
NO
Is the
document
or paper
loaded
properly?
YES
Is the
appropriate
paper
loaded into
the
machine?
YES
Have you
removed
the sealing
tape from
the toner
cartridge?
YES
Is the toner
cartridge
installed
properly?
YES
Is there
sufficient
toner in the
toner
cartridge?
YES
Have you
cleaned the
scanning
components
or fixing
unit?
YES
Are you
copying on
YES Remove all the obstructions.
NO Load the document properly.
"Placing Documents"
Load the paper properly.
"Loading Paper"
NO Load the type of paper that meets the paper specifications.
"Supported Paper Types"
NO Remove the sealing tape from the toner cartridge.
"Attention (Replacing the Toner Cartridge)"
NO Install the toner cartridge properly.
"Replacing the Toner Cartridge"
NO To view the onscreen instructions, see the following.
"Replacing Toner Cartridges"
NO Clean the scanning components or fixing unit.
"Cleaning the Machine"
YES Make sure to select the appropriate side of paper to copy your document on, as the side to
be placed face up in the paper source varies depending on the paper type that you are
030E-043