White Specks Or Spots Appear On The Printout - Canon imageCLASS MF3010VP User Manual

White Specks or Spots Appear on the Printout

Try one of the following to solve the problem.
<Cause 1> The paper type loaded is not appropriate.
Solution Make sure that the number of sheets or the paper type loaded in the paper cassette meets the paper
specifications.
" Supported Paper Types(P. 70) "
<Cause 2> Damp paper is used.
Solution Replace the paper stack with new unopened one.
" Supported Paper Types(P. 70) "
<Cause 3> The drum in the toner cartridge is deteriorated.
Solution Replace the toner cartridge with new one.
" Replacing the Toner Cartridge(P. 206) "
<Cause 4> White specks or spots appear around text and images when a high-
contrast document is printed.
Solution Change the [Special Print Mode] setting to [Special Settings 2] in the printer driver.
" Special Mode(P. 213) "
Troubleshooting
The density becomes lower with [Special Settings 2] than with [Off] or [Special Settings 1].
Additionally, text and lines may be reproduced less clearly.
178
85RS-047