JUKI LK-1901A Instruction Manual page 134

There are 8 items of the check programs below.
Touch panel compensation screen
→ Refer to
34-2 Performing compensation of
touch panel, p.134.
LCD check
→ Refer to
34-3 Performing LCD check, p.137.
Sensor check
→ Refer to
34-4 Performing sensor check.
p.138.
Machine speed
→ Refer to
34-5 Number of rotations of main
motor check, p.140.
Output check
→ Refer to
34-6 Performing output check. p.141.
Adjusting X/Y origins
→ Refer to
34-7 Performing X/Y motors/origin
sensors check, p.142.
Adjusting presser and thread trimmer
→ Refer to
34-8 Performing presser/thread
trimmer motor/origin sensor check, p.143.
Adjusting thread clamp
→ Refer to
34-9 Performing thread clamp
motor/origin sensor check, p.144.
133