Table of Contents
Advertisement
4
After adding the Z-Wave device to the Z-Wave network, the driver will do
some additional configuration.
Important: Do not skip this step by closing the window or clicking next!
5
If the device is added, configured, and identified successfully, the address
will show in the address field and the timer instructions will change to say
"Identification Successful".
Note: If the Z-Wave device will not identify (add), you should try to remove the
device and then try to identify the device again. See
devices".
8
"Removing Z-Wave
Advertisement
Table of Contents
Need help?
Do you have a question about the Z-Wave C4-ZWDUSB and is the answer not in the manual?
Questions and answers