Control 4 SR-250 User Manual

System Remote Control
SR-250 User Guide
Introduction
Before you use the Control4® SR-250 (models
C4-SR250-Z-B and C4-SR250B-Z-B), ensure that
the devices in your Control4 system are added and
configured.
NOTE: The SR-250B runs on OS 2.0 or later.
Use and Features
Use the System Remote Control SR-250 (SR-250)
with a Control4 system. Use this guide along with
the Control4 System Quick Start Guide and Control4
System User Guide for best results. The guides are
located on the Control4 web site.
Use the SR-250 to:
• Navigate system menus and access media on a
TV's monitor using the On-Screen Navigator.
• Navigate system menus and access media using
the SR-250's List Navigator.
The SR-250 extends the capabilities of a 'universal'
remote that simply learns the IR codes from TVs,
VCRs, and CD/DVD players.
Features:
• Bi-directional communication with system
components.
• Backlit display that converts the Control4
Navigator into a text format.
• 47 buttons total: 2 for quick access, 4
programmable, 8 transport control, plus
alphanumeric keys.
• ZigBee wireless.
• Wakes up when picked up or moved.
™

Install and Maintain Batteries

In OS 2.4 or later, Control4 offers a Remote
Recharging Station (sold separately) with a
rechargeable battery. For information, see "Remote
Recharging Station with Rechargeable Battery"
below.
Install the Batteries
Install the four (4) AA batteries (included) into the
back of the SR-250. Insert them according to the
diagram provided in the battery compartment (with
the + and - terminals aligned correctly).
Battery Use and Care Tips
• Keep battery contacts and compartment clean.
• Remove batteries from the System Remote
Control if it is not expected to be in use for
several months.
• Extreme temperatures reduce battery
performance. Avoid putting the System
Remote Control in very warm places.
Battery Replacement Safety Rules
CAUTION! To prevent battery shorting, leakage
or rupture:
• Use AA Alkaline batteries only in the SR-250.
• Do not mix battery types, such as Alkaline and
rechargeable NiMH batteries.
• Do not attempt to recharge a battery unless the
battery is specifically marked "rechargeable."
• Never dispose of batteries in a fire.
ATTENTION! Pour empêcher court-circuiter,
fuite ou rupture de batterie :
• Utilisez les accumulateurs alcalins d'AA
seulement dans le commutateur.
• Ne mélangez pas les types de batterie, tels que
les batteries alkalines et rechargeables de NiMH.
• N'essayez pas de recharger une batterie à moins
que la batterie soit spécifiquement marqué «
rechargeable ».
• Ne vous débarassez jamais des batteries dans un
feu.