Table of Contents
Advertisement
Connecting Z-Wave device drivers to the Z-Wave
network
To connect a Z-Wave device driver to the Z-Wave controller:
1
In Connections in the Network tab, select Z-Wave Network.
A list of Z-Wave device drivers will show in the Z-Wave Network
Connections window.
2
Double-click on the Z-Wave device driver to open the identify window or
highlight the device and click on the Identify button.
3
Identify (add) the Z-Wave device according to the manufacturer's
instructions, usually by pressing a Z-Wave button on the device. See the
documentation for the Z-Wave device for more information.
Note: You have 60 seconds to identify (add) the Z-Wave device to the network
and a timer will show the time remaining. If you run out of time, close the
window and try to identify the Z-Wave device again.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Z-Wave C4-ZWDUSB and is the answer not in the manual?
Questions and answers