Control 4 SR-250 Setup Manual

Use and Features
Control4 System Remote Control SR-250 (Model C4-SR250B-Z-B) is intended for
use in a Control4® system with OS 2.0 and later. It is included with the purchase
of select Control4 Controllers, but may also be purchased separately. This System
Remote Control can be used to:
• Navigate system menus and access media databases on a television or
monitor
• Navigate system menus and access media databases in its own display
window
• Control system devices
This System Remote Control goes beyond a typical "universal" remote that simply
learns IR codes from TVs, VCRs, CD players, and DVD players. This device features:
• Bi-directional communication with system components
• ZigBee wireless mesh networking
• Full access to system components
• Back-lighting on keys and display for ease of use in dark rooms
• Ambient light sensor for efficient control of backlighting
• Quick-access buttons to select recently used audio and video devices
• Programmable buttons
• Paging functionality
• Standard control features for: Digital Satellite Systems (DSS), cable boxes, TV tuners,
Digital Video Recorders (DVR), DVD changers/players, CD changers/players, MP3
players, VCRs, or TVs.
• Powered by four (4) AA batteries (included)
Install and Maintain the Batteries
Install the Batteries
Install the four (4) AA batteries (included) into the back of the SR-250. Insert them
according to the diagram provided in the battery compartment (with the + and -
terminals aligned correctly).
Battery Use and Care Tips
• Keep the battery contacts and compartment clean.
• Remove the batteries from the product if it is not going to be used for
several months.
• Extreme temperatures reduce battery performance. Avoid putting the SR-250
in very warm places.
Battery Replacement Safety Rules
WARNING! To prevent a battery short, leakage or rupture:
• Use typical AA Alkaline batteries only.
• Do not mix battery types, such as Alkaline and rechargeable
NiMH batteries.
• Do not attempt to recharge a battery unless the battery is specifically
marked "rechargeable."
• Never dispose of batteries in a fire.
ATTENTION! Pour empêcher court-circuiter, fuite ou rupture de batterie:
Utilisez les accumulateurs alcalins typiques d'AA seulement.
• Ne mélangez pas les types de batterie, tels que les batteries alkalines
et rechargeables de NiMH.
System Remote
Control SR-250
Setup Guide
™
• N'essayez pas de recharger une batterie à moins que la batterie soit
spécifiquement marqué « rechargeable ».
• Ne vous débarassez jamais des batteries dans un feu.
VORSICHT! Das Batteriekurzschluß, -durchsickern oder -abbruch
verhindern:
• Benutzen Sie AA alkalische Batterien nur im Schalter.
• Mischen Sie nicht Batteriearten, wie alkalische und nachladbare NiMH
Batterien.
• Versuchen Sie nicht, eine Batterie neuzuladen, es sei denn die Batterie
ist spezifisch gekennzeichnetes „nachladbares."
• Entledigen Sie nie sich Batterien in einem Feuer.
Configure the Remote Control
1 Start Composer and connect to a Director.
2 In the System Design view (selected by default), select the room where the
System Remote Control will reside.
3 In the My Drivers tab, locate the SR-250 under the User Interface section.
4 Double-click SR-250 to add the device to the project tree.
5 Identify the SR-250:
• In the Connections view, click the Network tab.
• Select System Remote Control SR-250 in the center pane.
• Click Identify (or right-click and choose Identify).
• When prompted to do so, press the red 4 button four (4) times to have the
device identify to the Control4 system.
Note: To complete the identification process, the System Remote Control
must be on the same ZigBee channel as the Controller; the Controller
must have Zserver enabled. If you need to change the ZigBee channel on
the System Remote Control, see Step 7.
• When the MAC address appears in the window, click Close.
6 View or change the System Remote Control properties as needed in
Composer: In the System Design view in the project tree, select the System
Remote Control SR-250 object to display the device's properties.