Troubleshooting - Control 4 Z-Wave C4-ZWDUSB Setup Manual

Troubleshooting

More information
When joined to a network, a Z-Wave device will not join a different network.
Z-Wave devices can be removed from any network at any time by using the
Remove button found in Available Devices. This is true even if they are not part
of the network performing the remove operation. If there appears to be trouble
joining a device to a network, it is a good idea to either perform a reset defaults
on the device, or explicitly perform a removal procedure, prior to attempting to
add the device to the existing network. This ensures the device is not currently
configured for another network prior to adding the device to the desired
network.
For the latest version of this document and to view additional materials, open
the URL below or scan the QR code on a device that can view PDFs.
14