Epson ET-2850U Start Here

Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
As part of the ReadyPrint™ program, Epson monitors ink usage
Note:
remotely to provide you with additional ink before you run out of it. The
product must be connected to the Internet to function and monitor ink
usage.
1
Unpack
Do not open the ink bottles until you are ready to fill the ink
Note:
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
Do not touch the flat white cable or the ink tubes and
Caution:
their translucent cover.
2
Connect the power cord to the back of the product and to
an electrical outlet.
Do not connect to your computer yet.
Caution:
ET-2850U
2
Choose a setup method
The Epson Smart Panel app can help you set up your printer
®
through an interactive, step-by-step process using your
smartphone or tablet.
To use your mobile device
for setup, continue to
step 1.
1
Download the Epson Smart Panel app
from your device's app store. Do not
launch the app yet.
2
Press the power button to turn on the product.
Do not connect your product to your computer yet.
Note:
3
Launch the app and follow its instructions to set up your
product.
For information on connecting your product to a computer, using
voice-activated printing, or solving problems, or for details on
reaching Epson support, see the sections on the back of this
sheet.
3
Fill ink tanks
Keep the ink bottles out of the reach of children and do not
Warning:
drink the ink.
This product requires careful handling of ink. If ink spills, wipe
Caution:
it off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Note:
• Use only Epson
570 ink provided to you under the ReadyPrint
®
program.
• Use the ink bottles included with the printer to set up the product. Part
of the ink will be used to charge the print head. These bottles may print
fewer pages compared with replacement ink bottles.
1
With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank.
Refer to the color-coded sticker to identify the color of each
Note:
tank.
or
If you do not want to
use a mobile device for
setup, skip to the "Fill ink
tanks" section below.