Epson L3250 Start Here

L3250/L3251
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
The illustrations show the L3250, but the steps are the same for
the L3251, unless otherwise specified.
Not all products are available in all regions.
Note:
1
Unpack
Do not open the ink bottles until you are ready to fill the ink
Note:
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Connect the power cord to the back of the product and to
an electrical outlet.
Do not connect to your computer yet.
Caution:
2
Choose a setup method
The Epson Smart Panel app can help you set up your printer
®
through an interactive, step-by-step process using your
smartphone or tablet.
To use your mobile device
for setup, continue to
step 1.
1
Download the Epson Smart Panel app
from your device's app store. Do not
launch the app yet.
2
Press the power button to turn on the product.
Do not connect your product to your computer yet.
Note:
3
Launch the app and follow its instructions to set up your
product.
For information on connecting your product to a computer,
using voice-activated printing, solving problems, or for details
on reaching Epson support, see the sections on the back of
this sheet.
3
Fill ink tanks
Keep the ink bottles out of the reach of children and do not
Warning:
drink the ink.
This product requires careful handling of ink. If ink spills,
Caution:
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
will print fewer pages compared with replacement ink bottles.
• Epson strongly recommends the use of genuine ink to ensure
optimal print quality and performance.
1
Open the ink tank
cover, then open
the cap for the
black (BK) ink tank.
Refer to the
Note:
color-coded sticker
on the ink tank unit to
identify the color of
each tank.
or
If you do not want to
use a mobile device for
setup, skip to the "Fill ink
tanks" section below.