Epson ET-2810 Series User Manual page 26

Loading Paper
>
Loading Paper in the Rear Paper Feeder
3. Load paper at the center of the paper support with the printable side facing up.
Important:
c
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line just under the
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
4. Slide the edge guides to the edges of the paper.
Close the feeder guard after sliding the edge guides.
Important:
c
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
5. Slide out the output tray.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
d
symbol inside the edge guide.
26