Controls And Connectors - AOC Spectrum 7Elr+ User Manual

POWER CORD
Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
3. Connect the power cord into your monitor's power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC, depending on the type of power cord supplied with your monitor.

CONTROLS AND CONNECTORS

VIDEO CABLE
Connecting the Video Cable: the monitor comes with a built-in video cable.
Plug the signal cable's 15-pin connector into the computer's video port and
tighten the two screws on the cable connector. (see figure 2)
Caution:Don't bend the signal cable, otherwise it will break the inner
wire.
Connecting the Power Cord: Plug the power cord into the monitor's AC
power jack. Then plug the power cord into a grounded AC outlet, UL-
approved power strip, or the power output socket on your PC.
Caution: If the AC outlet is not grounded, install the proper grounding
adapter (not supplied).
Connecting the Earphone Cable ( 7ElrA/7ElrA+ only ): Plug earphone
cable into earphone output jack.
Connecting the Audio Cable (7ElrA/7ElrA+ only ): Plug one end of the
audio cable into the computer's multi-media (or sound) card's audio output
and the other end into the monitor's audio input.
1
Figure 2
1. AC Inlet
2. Earphone (7ElrA/7ElrA+ only)
3. Audio In (7ElrA/7ElrA+ only)
2
3
Connecting Cables
4