How To Adjust A Setting - AOC Spectrum 7Elr+ User Manual

NOTES
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts , or in a place subject to direct sunlight , or excessive
dust or mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene,
or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.

HOW TO ADJUST A SETTING

1. Press the knob, the green LED lights and the power is ON.
Press this knob again, the green LED disappears and the power is OFF.
2. When press the "FUNC" key, the LED will flash to indicate the function
has been selected.
3. When function has been selected, press
4. Press the Up or Down key to get the optimal volume for the multimedia
model only. The most left LED will flash to indicate the adjustable levels
have reached to the maximum or minimum.
5. If you press the Func. & Down keys simultaneously it functions as an
audio mute, and press Up or Down key to release audio function for
multimedia model only.
6. Press the "FUNC" key until the LEDs of pincushion and trapezoid flash
simultaneously, then press Up or Down key to adjust the picture tilt to
horizontal position.
or to adjust picture image.
6