Table of Contents
Advertisement
CONTROLS AND CONNECTORS
VIDEO CABLE
Connecting the Video Cable: the LCD monitor comes with a built-in video
cable. Plug the signal cable's 15-pin connector into the computer's video port
and tighten the two screws on the cable connector.
Connecting the Power Cord: Plug the power cord into the LCD monitor's AC
power socket. Then plug the power cord into a grounded AC outlet or
UL-approved power strip or the power output socket on your PC.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
1
2
Figure 2
Connecting Cables
1.
Signal Cable
2.
Power Cable
5
Advertisement
Table of Contents
