Controls And Connectors - AOC LM726 Manual

CONTROLS AND CONNECTORS

SIGNAL CABLE
Connecting the Signal Cable: Plug the Signal Cable one end to LCD
monitor's socket , the other end to the computer's VGA port and tighten the
two screws on the cable connector.
Connecting the DVI Cable: Connect one end of the 24-pin DVI cable to the
back of the monitor and connect the other end to the computer's DVI port.
Connecting the Power Cord: Plug the AC-power cord one end to LCD
monitor's AC input socket , the other end to Wall outlet.
Connecting the Audio Cable: Plug audio cable between the computer multi-
media (or sound) card's audio output and monitor's audio input.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
Figure 2
1. VGA input
3. Audio in
英文
Connecting Cables
2. DVI Cable
4. AC Input socket
5