Elite Screens Tab-Tension 3 Series User Manual

Elite Screens Tab-Tension 3 Series User Manual

Floor rising tab-tensioned motorized screen

Advertisement

Quick Links

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third
party, then these instructions must be included.
Caution:
The screen's Black Bottom Drop is already set to its maximum drop distance. There is
NO extra Black Bottom Drop in the roller. Please be aware of this as it will void your
warranty with Elite Screens
the power cord for hardwire installations) to this unit are prohibited and will void your
warranty.
• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
• Handle the unit carefully during transportation to avoid any damages.
• To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
• The power outlet supplying power to the unit should be close to the unit and easily accessible.
• Do not install the unit on uneven or inclined surfaces.
• Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
• Never overload the power cord to prevent an electric shock or fire due to a loose contact or a
short circuit.
• There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open and make repairs to this unit.
• Make sure the power source this unit is connected to has a continuous power flow.
• If there is need to use an extension cord, make sure the cord has an equal rating as the
appliance to avoid overheat.
• Do not handle the power plug when your hands are wet, or your feet are in contact with water.
Rev. V07112023DT (DS0344)
Kestrel Tab-Tension 3 Series
Floor Rising Tab-Tensioned Motorized Screen
Visit
www.elitescreens.com
®
. Unapproved changes or modifications (except for cutting
www.elitescreens.com
User's Guide – E/H Type (RC1)
for latest updated version.
V1.0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tab-Tension 3 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite Screens Tab-Tension 3 Series

  • Page 1 Kestrel Tab-Tension 3 Series Floor Rising Tab-Tensioned Motorized Screen User’s Guide – E/H Type (RC1) V1.0 Visit www.elitescreens.com for latest updated version. IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
  • Page 2 User’s Guide Kestrel Tab-Tension 3 Series Do not use this unit under the following circumstances. • Disconnect the power cord under the conditions of heavy rain, wind, thunder, or lightning. • Avoid direct Sunshine, rain shower and moisture. • Keep away from fire sources and high temperature to prevent this device from overheating.
  • Page 3 User’s Guide Kestrel Tab-Tension 3 Series FCC Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4 User’s Guide Kestrel Tab-Tension 3 Series PARTS IDENTIFICATION Front of screen Screen material Tab/Strings Bottom black masking border Power terminal / Power switch Back of screen Closing Panel/Lid Cross-rising spring scissor mechanism Case/Housing Feet Note: Please always store the screen flat horizontally. Never store the screen in a vertical position as it will permanently damage the screen’s structure, shift the material, and...
  • Page 5 User’s Guide Kestrel Tab-Tension 3 Series Kestrel Tab-Tension 3 | Controls and Accessories A. IR (InfraRed) B. RF (Radio C. Wall box D. RJ50 Cable E. AAA batteries Remote Control Frequency) Remote controller ZRC1-RJ50 ZRC1-IR control ZRC1-RF ZRC1-WB * Pre-installed...
  • Page 6 User’s Guide Kestrel Tab-Tension 3 Series How to synchronize/pair a new RF remote: • Press & hold the “Programming Key”, then press the “Up Key” on the Wall box controller (wall- box LED flashes). Reference the wall box controller section for programming key location.
  • Page 7 User’s Guide Kestrel Tab-Tension 3 Series 4. Wired 5-12 volt trigger (Fig.4): Requires a 3.5mm to 3.5mm mono cable (Not included) Step 1: Connect one end the RJ50 cable to the screen and the other end to the Wall box controller.
  • Page 8 2. Clear/Reset the Screen’s Drop Position to factory default: Press & hold the “Programming Key + “Stop key” on the wall box controller. ® For more information, technical support or your local Elite Screens contact, http://www.elitescreens.com/ please visit Rev.

Table of Contents