Elite Screens Saker Tab-Tension Series User Manual

Elite Screens Saker Tab-Tension Series User Manual

Electric wall/ceiling projection screen

Advertisement

Quick Links

Electric Wall/Ceiling Projection Screen
Saker Tab-Tension Series
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop limit. There is NO extra black-
matte drop material on the roller. Please be aware that altering the vertical limit switch to drop the screen
material off the roller voids your warranty with Elite Screens®. Unapproved changes or modifications (except
for cutting the power cord for hardwire installations) to this unit are prohibited and will likewise void your
warranty.
For more information, please contact our Technical Support Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, make sure the power connection is secure.
The power source should be close to the unit and easily accessible.
Do not install the unit on uneven, or inclined surfaces;
To avoid electrical shock or product damage, do not install this device in a damp place.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip hazard.
Avoid electrical shock or fire, by not overloading the power cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to
disassemble this unit by yourself. Consult an authorized technician instead.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure said cord has a compatible power rating.
Do not handle this or any other electrical device if you are wet or standing in water.
Whenever the screen reaches its end of life, follow local environmental guidelines regarding its
proper disposal.
Do not use this unit under the following circumstances.
Disconnect the power cord if exposed to moisture, rain, wind, electrical storms or snow.
Avoid exposure to direct sunlight or any of the conditions stated in the previous bullet point.
Keep away from fire or other high temperature heat sources.
Cut off the power supply first before attempting maintenance or removal.
Do not attempt to use this screen if there are obvious signs of damage.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
MZ04242018
User's Guide
1
www.elitescreens.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Saker Tab-Tension Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite Screens Saker Tab-Tension Series

  • Page 1 Please be aware that altering the vertical limit switch to drop the screen material off the roller voids your warranty with Elite Screens®. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will likewise void your warranty.
  • Page 2 WARNING Individual modifications to this product are prohibited and will void the manufacturer’s warranty. Please contact the Elite Customer Service Team with any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 Installation Instructions For installation assistance, please consult a professional Installer. EliteScreens is not liable for faulty installations. A. Wall Mount Flush hidden mount (movable position) This mount method allows the screen to slide horizontally. M5x25MM round head cross screws Front view of bracket (A) Wall 1.
  • Page 4 If you would like to adjust the screen tension, please contact Elite Screens® for assistance to avoid damaging the screen and voiding your warranty.
  • Page 5 Screen operation Electric Current: Depending upon region, your Elite Screen will operation 100v, 110v, or 220v voltage. 1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet. 2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below. 6 ways to control your Saker 2.
  • Page 6 3 prong power cord The back of the projector DC 5-12V out RJ45 Input Wireless 5-12V trigger cable Stop Down Fig.4 Fig 5 5-12 volt trigger cable Here’s how to set up your Wireless 5-12 volt trigger | Synchronization Instructions Step1: Connect one end of the 3.5 mm wireless 5-12 volt trigger cable to the RF remote.

Table of Contents