Related Manuals for ESAB OPC Flux recovery unit
Summary of Contents for ESAB OPC Flux recovery unit
- Page 1 OPC Flux recovery unit Instruction manual Valid for: From serial no. 452-xxx-xxxx 0443 407 001 GB 20190417...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY ....................... Meaning of symbols ................Safety precautions ................. INTRODUCTION ..................General ....................OPC flux recovery unit components ............ TECHNICAL DATA ..................INSTALLATION.................... General ....................Connections.................... OPERATION ....................General ....................Starting work................... MAINTENANCE ................... General ....................Daily ...................... -
Page 3: Safety
Safety Data Sheets (SDSs). Safety precautions Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who works on or near the equipment observes all the relevant safety precautions. Safety precautions must meet the requirements that apply to this type of equipment. The following recommendations should be observed in addition to the standard regulations that apply to the workplace. - Page 4 Protect your eyes and body. Use the correct welding screen and filter lens and wear protective clothing. • Protect bystanders with suitable screens or curtains. NOISE - Excessive noise can damage hearing Protect your ears. Use earmuffs or other hearing protection. 0443 407 001 - 4 - © ESAB AB 2019...
- Page 5 For further information contact the nearest ESAB dealer. ESAB has an assortment of welding accessories and personal protection equipment for purchase. For ordering information contact your local ESAB dealer or visit us on our website. 0443 407 001 - 5 - ©...
-
Page 6: Introduction
OPC flux recovery unit components The OPC flux recovery unit consists of: Ejector, air-operated. The side of the ejector to be connected to the cyclone is fitted with a flange. -
Page 7: Technical Data
3 TECHNICAL DATA TECHNICAL DATA OPC flux recovery unit Max permissible air pressure 6 kp/cm Continuous A-weighted noise pressure at idle running 78 dB Max. continuous A-weighted noise pressure while welding 74 dB Max air consumption at different pressures (max working pressure) liter/min See the dimension drawing in the "DIMENSION DRAWING"... -
Page 8: Installation
It is important to make sure that the suction nozzle (3) is electrically insulated from live parts through the insulation of the holder (4) and that it cannot get into contact with other live parts around the contact device. 0443 407 001 - 8 - © ESAB AB 2019... -
Page 9: Operation
Shake the filter bag now and then. Replace the filter bag when the pressure drop cannot be remedied by shaking the bag, or after about 8 working hours. 0443 407 001 - 9 - © ESAB AB 2019... -
Page 10: Maintenance
Check packings and hoses for leakage. As necessary • Replace the filter bag when the suction capacity is insufficient or after about 5-8 working hours. Shake the filter bag as necessary. 0443 407 001 - 10 - © ESAB AB 2019... -
Page 11: Ordering Spare Parts
7 ORDERING SPARE PARTS ORDERING SPARE PARTS Spare parts and wear parts can be ordered through your nearest ESAB dealer, see esab.com. When ordering, please state product type, serial number, designation and spare part number in accordance with the spare parts list. This facilitates dispatch and ensures correct delivery. -
Page 12: Dimension Drawing
DIMENSION DRAWING DIMENSION DRAWING Hose L= 1000 mm Nozzle L= 210 mm Flux container 10 l (0147649881) 0443 407 001 - 12 - © ESAB AB 2019... - Page 13 DIMENSION DRAWING Flux container 7 l (0332994xxx) Flux container 7 l (0413315xxx) 0443 407 001 - 13 - © ESAB AB 2019...
-
Page 14: Ordering Numbers
ORDERING NUMBERS ORDERING NUMBERS Ordering number Denomination Type 0148 140 880 OPC Flux recovery unit A2 / A6 / EWH 1000 Technical documentation is available on the Internet at: www.esab.com 0443 407 001 - 14 - © ESAB AB 2019... -
Page 15: Spare Parts
2 0252900410 Hose clamp 1 0191813801 Hose 1 0145740880 Suction nozzle kit More information on next page. 1 0147384881 Nozzle holder kit More information on next page. 1 0215201345 O-ring 0443 407 001 - 15 - © ESAB AB 2019... - Page 16 12×6.4 T=1.5 0456601001 Clamp 0145131002 Insulating sleeve Inner diamater 35 mm 0145131003 Insulating sleeve Inner diameter 25 mm 0154739001 Attachment 0154738001 Boom 0154737001 Boom 0145131004 Insulating sleeve Inner diameter 20 mm 0443 407 001 - 16 - © ESAB AB 2019...
- Page 17 10 l (optional equipment) 0154007001 Hopper for flux 0148837001 Window 0147645001 Fitting Washer D8/4.3×0.8 0191898108 Rivet 0153347880 Flux valve 0215201232 O-ring 0148799001 Washer Screw M3×16 0020301780 Flux strainer 0443383002 Flux hose L=500 0443 407 001 - 17 - © ESAB AB 2019...
- Page 18 SPARE PARTS Item Qty Ordering no. Denomination Notes 0153299880 Flux nozzle (optional equipment) 0153290002 Pipe holder 0153296001 Pipe bend 0153425001 Wheel 0443 407 001 - 18 - © ESAB AB 2019...
-
Page 19: Accessories
Flux container, plastic, 7 litres (A2), see in the "DIMENSION DRAWING" chapter 0443383001 Flux hose 0443373001 Flux hose 0190789801 Suction hose (1) 0148143001 Cover (2) 0215201353 O-ring (3) 0148144001 Profile strap (4) 0443 407 001 - 19 - © ESAB AB 2019... - Page 20 For contact information visit esab.com ESAB AB, Lindholmsallén 9, Box 8004, 402 77 Gothenburg, Sweden, Phone +46 (0) 31 50 90 00 http://manuals.esab.com...
Need help?
Do you have a question about the OPC Flux recovery unit and is the answer not in the manual?
Questions and answers